LUYOR-3109高强度紫外催化光源促销
LUYOR-3109紫外光源采用了9颗365nm大功率led,安装有二次光学透镜,输出紫外线强度高,...
2024-08-08UVP B-100AP黑光灯操作维修指南
编辑:无损检测事业部时间:2019-10-15 16:18:07浏览1725 次
如果您实验室有这款B-100AP黑光灯,在使用当中遇到问题,可随时咨询上海路阳生物技术有限企业,大家可提供B-100AP的紫外线灯泡,也能够提供B-100AP黑光灯维修服务,不管您在实验中遇到任何B-100AP黑光灯的问题,均可咨询大家。现将B-100AP的操作使用指南提供给大家下载,供参考。
如果您实验室有这款B-100AP黑光灯,在使用当中遇到问题,可随时咨询上海路阳生物技术有限企业,大家可提供B-100AP的紫外线灯泡,也能够提供B-100AP黑光灯维修服务,不管您在实验中遇到任何B-100AP黑光灯的问题,均可咨询大家。B-100AP黑光灯在科研机构常被用做荧光蛋白的激发光源,也有的去做光催化反应。现将B-100AP的操作使用指南提供给大家下载,供参考。
These Instructions cover UVP’s high-intensity 100-watt B-100 series lamps (115V and 220V). The B-100AP, B-100AP/R and B-100YP models are manufactured with UVP’s Cool-Touch?plastic housing. B-100A, B-100A/R and B-100Y models are manufactured of a durable scratch-resistant, powder-painted aluminum. The B-100Y and B-100YP models feature a yellow filter. Lamp and accessory drawings and replacement parts lists for each model are included in these instructions.This manual covers the following lamp part numbers:
B-100AP高强度紫外线灯订货编号为:95-0127-02(220v)
B-100AP高强度紫外线灯订货编号为:95-0127-01(110v)
General Information for Ultraviolet Inspection
Make tests in a darkened area for best contrast. Fluorescence may be bright or dim, depending on amount of fluorescing agent present. Be careful to distinguish fluorescence from blue light reflection on polished metal surfaces. UVP Model UVC-503 Safety Goggles are recommended to eliminate blue haze resulting from eye fluorescence caused by reflected longwave ultraviolet radiation.
I
Installation
An 8-foot primary and secondary line cord is supplied on all units except the B-100AP/R and B-100A/R which come with 8-foot primary and 20-foot secondary line cords. If the receptacle is not fitted with 3-prong plug, use a 2-prong adapter and attach grounding lead to screw center of receptacle plate. Some units may ship with bare wire leads. Connect the appropriate plug for your area.
Operation
Turn on/off switch on transformer base to ON position for starting. Although a cool lamp starts immediately, allow approximately five minutes to reach full brilliance. When use is intermittent, it is preferable to leave the lamp burning. This assures longer bulb life and avoids delay in restarting. Restarting does not take place immediately as the mercury vapor within the bulb must cool. Delay is typically 4 to 8 minutes. Any interruption in the power supply, such as an excessive drop in voltage, will extinguish the arc. Restarting typically will be delayed while the mercury vapor cools. Full voltage must be restored to permit the arc to strike.
While mounted on the transformer base, the lamp housing can rotate 360°. For handheld use, detach the lamp housing from the transformer.
Replacement Parts List
Parts lists are provided for the B-100 lamp models.
Two parts lists are shown -- one for the Cool-Touch housing lamps and one for the aluminum housing lamps. For additional ordering information or an authorized dealer, contact:
CHINA, shanghai 021-64195798
NOTE: An RGA (returned goods authorization) numberis required prior to returning any products to UVP.
Contact UVP’s offices to obtain a number.
美国UVP B-100AP黑光灯操作使用说明书下载: